When a car is driving, bumps and bumps are inevitable, and the damage to the paint surface of the car body is self-evident. In addition to scratches and scratches, smog, acid rain, bird droppings, resin, etc. will also cause varying degrees of damage to the car paint. For this reason, the car paint protection film came out, replacing the previous car paint maintenance methods such as waxing, sealing, glaze and crystal plating. But the film is good or bad, how do we identify it? Here are 7 tips to tell you how to distinguish the quality of car paint protection film.
1. Material
The commonly used materials for car paint protection film are TPU, TPH, and PVC. At present, the best car paint protection film is made of TPU material.
This method can be used to identify TPU: use a lighter to ignite the paint mask sample, and the TPU will not produce black smoke after burning; the stretch ability of TPU can reach 300%.
2. Taste
Feel through the sense of smell, if you smell a very strong smell of chemicals, then this shows that the raw materials used in the paint protection film are inferior. A good paint protection film should be odorless or not pungent.
3. Brightness
A good car paint protection film can increase the brightness of the paint surface by more than 30%, especially for dark car paint.
4. Antifouling
The painted surface that has been filmed can be wiped clean with a paper towel. If it is a car paint protection film with poor performance, it cannot achieve this effect and cannot be scrubbed.
5. Piercing
The paint protection film made of TPU can be lifted up to 300%, and the stretched rate of TPH material is 200%. TPU is more resilient than TPH, and it is almost impossible to puncture with a screwdriver. This also shows that the two materials are slightly different in their ability to resist scratches and penetration.
6.Water repellent
The car paint protection film made of TPU has good smoothness on the film surface, so that the liquid is not easy to remain, thus avoiding the worry of parking the car outdoors on rainy days and being polluted by liquids such as acid rain.
7. Cover up the original scratches of the car paint
Vehicles that have been used for a period of time, especially those with black or dark paint, will definitely have many obvious chaotic patterns on the hood, but after a good paint protection film is pasted, the difference between the uncoated and the coated The difference between the two cars is obvious, the previously obvious wear marks are completely covered up, and the overall body has a new look.
The above is about the method of distinguishing the quality of the car paint protection film. As long as you judge according to these conditions when purchasing the car paint protection film, you can draw a conclusion. Noyark car paint protection film uses Lubrizol imported tpu substrate and nano-coating, which can protect the paint surface of the car body in an all-round way, without fear of scratches, collisions, corrosion resistance, increase the brightness of the paint surface, and automatically repair scratches .
Post time: Aug-01-2023